Free Vinyl Lettering. Order ANYTHING over $50 from us and you get a free one-line vinyl window decal. These are professional vehicle graphics that will last for years and are car wash safe. This can be applied to your window or body of your car or truck. Can be removed with Goo Gone or WD-40 which is available at your local department store.

Your Custom Vinyl Window Lettering will be 23" long and 3" tall (depending on the font you choose). Have a favorite unique font? Email your font to us (PC Format) after checkout and we will make it for you. For longer lettering you can upgrade below.

 Just type in the line below exactly what you want to say on your vehicle lettering and select your vinyl color. Very easy to apply with a plastic putty knife or credit card. By default your free window lettering will be about 23 inches long. If you would like it shorter please let us know during checkout.

Be sure to add this to your cart, and it is FREE if you are ordering over $50 of product from us!

How To Apply Vehicle Lettering:

• Be sure the paint or window is clean & dry
• Put a drop (just 1 drop) of dish washing detergent in a spray bottle full of water.
• Spray the area you will install your vinyl lettering liberally
• Peel the backing away from the carrier paper (the backing is thicker). The carrier paper is like think masking tape.
• Now spray the sticky side of the vinyl lettering liberally
• Lay your vinyl lettering lightly into position. It's always a good idea to have someone help you.
• Now is the time to be sure the vinyl lettering is straight, and the detergent/water combo will allow you to move them around.
• Once you have it positioned the way you want, use a squeagy or credit card to start smoothing it out, from the center out (don't move carrier sheet yet). This will remove all the water on the backing and the air bubbles.
• Now let sit for at least 15 minutes to allow the adhesive on the vinyl lettering to set.
• Now carefully remove the carrier sheet from the vinyl lettering. Be sure not to peel and of the edges of the lettering up
• If you see any air bubbles still, just put the carrier sheet (upside down) back over the lettering and smooth out some more with the credit card or squeegy
• Done! If you ever want to take them off, simply heat with a hair dryer or heat gun. Once you get the bulk off, you can get any leftover adhesive out with WD-40 or Goo Gone